Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint. Home Painters Denver CO
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.
An example of the wall measurement would be: 40 linear feet of bedroom space, x 8 wall height, =  320, x 2 = 640. Minus 1 door (60) and 2 windows (80) = 500 sq feet being painted. Then divide the 500 by 400 (sq feet per gallon), and you get 1.25 gallons (4.73 L) needed for that room. For this, you'd need 1 gallon (3.8 L) and 1 US-quart (950 ml). If the amount it comes out to is over 1.3, we recommend just getting 2 gallons (7.6 L) so that you have leftovers if needed, since 2 US quarts (2,000 ml) costs essentially the same as a gallon in most stores.
You can expect to pay between $700 to $3,000 to paint wood siding. You’ll end up spending $1 to $3 per square foot, but typically you’ll find this material is cheaper than brick or vinyl. Wood requires some type of sealant, be it paint, stain or oil. Lumber takes well to a wide variety of coverings giving you endless options for modern, contemporary or classic looks. Some things to consider when choosing wood:

If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement.  House Painting Denver Colorado
From dull to shiny finishes, paint comes in several different lusters. A paint’s luster depends on its mixture of pigment, resin, and additional ingredients. If you’re struggling to decide what finish you want, note that glossier finishes tend to be more durable and washable. Flat paint, on the other hand, is better at hiding surface imperfections. Pearl and eggshell lusters fall somewhere in the middle, as they are more washable than flat paint and partially hide irregularities. Denver Home Painting
Some paints are two-in-one paint and primer products, or so-called "self-priming paints." These paints are designed to seal and cover surfaces in one coat. But, here's the secret: though it's called a paint-and-primer-in-one product, there's actually no primer in the mix—what you're really working with is just a thicker paint that often doesn't perform as well as using separate primer and paint. Denver House Painting

Wood is probably the most time-consuming when it comes to preparing it for paint. It has to be scraped and sanded until there isn’t a single chip or bit of loose paint in sight. Any wood siding or trim with wood rot will need to be replaced, and all cracks and holes need to be filled with epoxy filler. Brush painting and roll painting wood siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft. House Painting Denver Colorado
×