Following the same process as the primer, cut in the walls with your chosen paint. For best results, paint one wall at a time. This makes it easier to spread the paint while it’s still wet. Work from top to bottom, rolling the paint in V or W-shaped strokes. Before applying a second coat, wait two to four hours. Then proceed with the same process used for the first coat.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth. Denver House Painting
For walls, measure the linear feet of wall space (measuring along the baseboards) for the areas to be painted (using a tape measure, laser, or both). Then multiply this by the ceiling height (usually it is 7.5 or 8). If there are 2 story areas, measure them separately, and multiply them by double the regular wall height. Then multiply the total number by 2 (for 2 coats).
Begin prepping your walls by removing any outlet covers or lighting fixtures (if possible). Next, inspect your walls for any defects. If you encounter cracks, dents, or holes in your walls, simply fill them in with caulk or spackling compound. There are also a number of DIY tips to fill nail holes. Once your repairs dry, smooth them down with sandpaper and wipe the walls down with a damp sponge. House Painting Denver Colorado